Roland Mb-24 Notes - Roland VS-2480 Owner's Manual

Supplemental Information
SURROUND, CH VIEW, MAIN CUE Areas
SURROUND Area
VE-7000 knob or button:
20. Joystick
21. EDIT
CH VIEW Area
VE-7000 knob or button:
22. EDIT
23. SHIFT
MAIN/CUE Area
VE-7000 knob or button:
24. PAN
25. ON/OFF
26. EDIT (Set CENTER)
Hold SHIFT and press MAIN/CUE EDIT•Set CENTER to set PAN to its C (center)
value.
Hold SHIFT and press MAIN/CUE ON/OFF•CH LINK to link or un-link the currently
selected channel with its odd/even partner.

Roland MB-24 Notes

The optional MB-24 Level Meter Bridge adds a full-sized meter array to your VS-2480.
To learn how to connect and MB-24 to your VS-2480, see Page 382. "EXT LEVEL METER
(MB-24)" on Page 360 explains how to configure the MB-24 for use with the VS-2480.
When used with the VS-2480, the MB-24 does not use its PRE EQ, SECTION (1st UNIT/
2nd UNIT), MULTI OUT, FLEX BUS, MULTI IN, INPUT, DIM," or TALKBACK
indicators. Also, you may occasionally notice that PRE EQ and 1st UNIT light
immediately after the MB-24 is turned on. This does not indicate a malfunction.
The MB-24's tick indicator—when the TIME DISPLAY
parameter is set to MEASURE/BEAT—shows one-tenth
the actual number of ticks since there are only two digits
available for this purpose, as shown here.
396 www.rolandus.com
20
21
22
23
24
26
25
Acts as CH EDIT parameter or F button:
Surround pan and depth
F2 (Surrnd)
Same as CH EDIT parameter or F button:
CH EDIT button—displays CH EDIT VIEW screen
Performs same function as VS-2480 SHIFT button
Same as CH EDIT parameter or F button:
PAN
MIX on/off switch
Displays CH EDIT VIEW screen, PAN selected
Roland VS-2480 Owner's Manual
Hold down SHIFT as you
turn a VE-7000 knob to
activate its TURBO EDIT
feature. When TURBO
EDIT is turned on, a knob
scrolls through values in
smaller or larger
increments, depending on
the parameter.
For Measure 29, Beat 3,
Ticks 470-479 are shown
as simply Tick 47.