Scrub; Pinpointing An Event With The Preview Buttons - Roland VS-2480 Owner's Manual
24bit/24track digital audio workstation
Hide thumbs
Also See for VS-2480:
- Supplementary manual (132 pages) ,
- User manual (92 pages) ,
- Owner's manual addendum (92 pages)
Table of Contents
Advertisement
13—Operating the Hard Disk Recorder
Pinpointing an Event with the PREVIEW Buttons
1. Position the timeline in the general area of the event you want to pinpoint, noting
2. Press PREVIEW TO to see if the preview reaches the event or plays right through it.
3. If PREVIEW TO doesn't reach the event, move the timeline forward in time slightly.
4. Press PREVIEW TO again.
5. Repeat Steps 2-4 until the preview ends just at the beginning of the event.
6. Note the timeline's current position and press PREVIEW FROM.
7. Make sure that none of the event is being chopped off at the front, and that as soon
8. Adjust the timeline's position as necessary, checking it with PREVIEW FROM.
9. When you're satisfied that you have the timeline positioned at the moment at
In the above instructions, we used both PREVIEW TO and FROM. You may not always
need to use both to find the location you're looking for.
Setting the PREVIEW TO and FROM Times
1. Press UTILITY.
2. If "PlyRec" isn't displayed above F4, press PAGE until it is.
3. Press F4 (PlyRec).
4. Press F2 (Param2).
5. Set PREVIEW TO LENGTH and PREVIEW FROM LENGTH to the desired times,
6. Press F6 (EXIT) to confirm your changes.
Scrub
When you want to find an audio event with absolutely
microscopic precision—such as when you're editing
tracks—use the Scrub feature. Scrub plays a tiny piece of
the project quickly over and over so that as you move the
timeline in small increments, you can find precisely what
you're looking for. You can set Scrub to play before or after
the timeline using the PREVIEW TO or FROM buttons.
You can also set the Scrub length.
184
its position in the current time location display.
If it plays through the event, move the timeline back a little.
as you hit PREVIEW FROM, you hear the event.
which the event occurs, place a locator or a marker so that you can easily return to
the event as you need to.
in tenths of a second, from 1.0 sec to 10.0 sec.
www.rolandus.com
Timeline
Scrub length
Scrub length
Scrub
Roland VS-2480 Owner's Manual
SCRUB
Scrub
Advertisement
Table of Contents
