Undo And Redo - Roland VS-2480 Owner's Manual
24bit/24track digital audio workstation
Hide thumbs
Also See for VS-2480:
- Supplementary manual (132 pages) ,
- User manual (92 pages) ,
- Owner's manual addendum (92 pages)
Table of Contents
Advertisement
4—Setting Up and Basic Operations
3. You can press F1 through F5 to view the following screens:
When the ID PL, ID IN or ID TR screens are in view, the meters strip is visible. You can
change what's shown on the left side of the meters strip—the right side always shows
the MONITOR and MASTER output levels:
1. Press HOME/DISPLAY.
2. Press PAGE until INPUT appears above F1.
3. Press:
Locking the Info Display
You can lock the currently displayed Info Display screen so that it stays in view as you
move from screen to screen on the VS-2480 itself.
1. Press HOME/DISPLAY.
2. Press PAGE until "IDHold" appears above the F6 button.
3. Press F6 (IDHold).
4. To unlock the display, repeat Steps 1-3.
UNDO and REDO
Undo
The Undo function allows you to reverse—or "undo"—track recording and editing
operations. Each project remembers up to 999 of your most recent recording and
editing actions and can restore the project to the state it was in before each action.
Each action is assigned a numbered
"Undo level." The lower the number
of the level, the more recent the
action. All undoable actions in a
project appear in the Undo list along
with the date and time of each action.
When you undo a recording or editing operation, everything you did after the
operation originally took place is also undone.
Undo affects track recording and editing operations only—it doesn't undo parameter
value changes.
72
•
ID PL (Info Display Playlist screen)—shows the track playlist in the lower area on
the display.
•
ID IN (Info Display Input Channels)—shows all 24 input channels in the lower
area on the display.
•
ID TR (Info Display Track Channels)—shows all 24 track channels in the lower
area on the display.
•
ID Mlt (Info Display Multiple Parameters)—shows a detailed view of the currently
selected group of 16 channel strips (Page 137).
•
ID ChV (Info Display Channel View)—shows the CH EDIT parameters for the
currently selected input, track or FX return channel.
•
INPUT—to meter the VS-2480's analog and digital input jacks and connectors.
•
IN Mix—to meter input channel levels.
•
TR Mix—to meter track channel levels.
•
AUXDIR—to meter the AUX and DIR bus levels.
•
OUTPUT—to meter the VS-2480's output levels.
www.rolandus.com
Newest
Fourth guitar solo take at 3:10
Third attempt at guitar solo at 3:08
Tried to record solo again at 3:05
Recorded guitar solo at 3:00
Oldest
Roland VS-2480 Owner's Manual
Newest
Undo Level 1
Undo Level 2
Undo Level 3
Undo Level 4
Oldest
Advertisement
Table of Contents
