Event; Motion Detection - Idis HE-1101 User Manual

Part2 - Remote Setup

Event

Configure event detection settings.
32

Motion Detection

Select Motion Detection to configure motion detection
event settings. With motion detection event enabled,
motion detections within the designated area will be
assumed as events.
Sensitivity: Select daytime and nighttime motion
detection sensitivity levels. Higher values will result in
more sensitive motion detection.
Minimum Blocks for Detection: Select minimum
blocks for daytime and nighttime motion detection.
Motion must take place over the selected number
of blocks in order for it to be considered as a motion
detection event.
Motion Zone: Click Setup and define the motion
zone using blocks.
- (Select)/ (Unselect): Enable/disable motion
detection.
- (Single Block): Select/unselect motion detection
blocks individually.
- (Zone): Select/unselect multiple motion
detection blocks.
- (All): Select/unselect all motion detection blocks