Related Manuals for Idis DA-MC1101
Summary of Contents for Idis DA-MC1101
-
Page 1: Media Converter
10/100/1000 Base-T to Gigabit Fiber Media Converter Operation Manual DA-MC1101 Powered by... -
Page 2: Before Using The Product
DA-MC1101 is designed to fulfill requirements for forming a Gigabit network, and can extend a connection up to 10KM using fiber optic cables. The LED indicators located on the front panel of DA-MC1101 shows the operating status of the product. -
Page 3: Product Features
● Mode switching using DIP switches Accessories The product consists of the following components. Power FDX Status Speed FO TX Diag Link / Act Main Unit (DA-MC1101) 5V DC adapter Operation Manual Overview Front LED indicators Power FDX Status RJ45 port... -
Page 4: Installation
Connect the Video In port of DirectIP™ NVR and RJ45 port of DA-MC1101 #1 using a UTP cable. Insert an SFP module into SFP slot of DA-MC1101 #1 and connect the fiber optic cable to the module. The connection distance can be extended to 500m to 10km using fiber optic cables. - Page 5 Insert an SFP module into SFP slot of DA-MC1101 #2 and connect the fiber optic cable to the module. Connect the RJ45 port of DA-MC1101 #2 to a DirectIP ™ Switching Hub or a network camera using a UTP cable.
- Page 6 • The connection distance can be extended to 500m to 10km using fiber optic cables. • The connection distance is determined by the SFP module and the fiber optic cable. • For more details on supported SFP modules, refer to "7. Supported SFP Modules". Insert an SFP module into SFP slot of DirectIP™Gigabit PoE Switch and connect the fiber optic cable to the module.
-
Page 7: Dip Switch Settings
Checking Other Information DIP Switch Settings In factory settings, Pin 1 and Pin 5 are switched On and the rest are switched Off. Pin No. Operation TX Auto-Negotiation Disable Enable Manual TX Data Rate 10M/100M 100M Manual TX Data Rate 1000M 10M or 100M 1000M Flow Control... -
Page 8: Checking Led Indicators
Checking LED Indicators Color Operation Power Green Turns on when power is connected. Turns on when the connection between remote device and TX cable is established. Green TX Link/Act Blinks when transferring data. Blinks when fiber optic cable connection is disconnected in Orange LLF Mode. -
Page 9: Specifications
Specifications Model DA-MC1101 Network Protocols IEEE 802.3, 802.3u, 802.3ab, 802.3z Port type 1 x RJ-45 LAN connector, 1 x SFP slot Power, FDX, Status, Speed, FO Link/ACT, TX LED type Link/ACT Power adapter I/P AC 100-240V O/P DC 5V, 2A Power consumption 3.4W... - Page 12 IDIS Co., Ltd. For more information, please visit at www.idisglobal.com Ver. 1.00...