Fen - Idis HE-1101 User Manual

Type: Select the type of network you are using. If this
option has been changed, click Save to apply the
current settings, and then restart Remote Setup. If you
do not restart Remote Setup, the changes afterwards
will not be applied.
- Manual: Select if using a static IP. You will then be
able to configure the related settings manually.
- DHCP: Select if connected to the network using
DHCP. Click Save to retrieve IP address and other
network settings automatically from the DHCP
server.
DNS Server: Enter the DNS server's IP address. By
using the DNS server, you will be able to use domain
names instead of IP addresses when configuring the
FEN, time, or SMTP server. If the encoder is connected
to the network via DHCP, select the From DHCP
option to retrieve the DNS server's IP address from the
DHCP server automatically. The updated address will
be displayed upon the subsequent connection.
Contact your network administrator for more
information on the encoder's network connection
type, the DNS server's IP address, and other related
information.
If using DHCP, the encoder's IP address may change
from time to time. We therefore recommend that
you use the FEN feature.

FEN

Select Use FEN to enable the FEN feature.
FEN Server: Enter the FEN Server's IP address or
domain name.
Port: Enter the FEN Server's port number.
FEN Name: Enter a encoder name you wish to register
to the FEN Server. Click OK to check the name's
availability.
Part2 - Remote Setup
19