Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Idis HE-1101
Summary of Contents for Idis HE-1101
- Page 1 HDMI & VGA Video Encoder User's Manual HE-1101 Powered by...
-
Page 2: Safety Precautions
Before reading this manual This is a basic operation manual for use of an IDIS HDMI & VGA Video Encoder. Users who are using this product for the first time, as well as users with experience using comparable products, must read this operation manual carefully before use and heed to the warnings and precautions contained herein while using the product. -
Page 3: Important Safeguards
Safety Precautions Safety Precautions 13. Servicing Important Safeguards Do not attempt to service this equipment yourself. Refer all servicing to qualified service personnel. 14. Damage requiring Service 1. Read Instructions Unplug this equipment from the wall outlet and refer servicing to All the safety and operating instructions should be read before the qualified service personnel under the following conditions: appliance is operated. -
Page 4: Fcc Compliance Statement
Safety Precautions FIn-Text Symbol Type Description Caution Important information concerning a specific function. Note Useful information concerning a specific function. User’s Caution Statement Caution: Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC Compliance Statement THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. - Page 5 © 2018 IDIS Co., Ltd. IDIS Co., Ltd. reserves all rights concerning this operation manual. Use or duplication of this operation manual in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited. Contents of this operation manual are subject to change without prior notice for reasons such as functionality enhancements.
-
Page 6: Table Of Contents
Table of Contents Part 1 - Introduction ......... 8 Product Features . - Page 7 Part 3 - IDIS Web ........
-
Page 8: Part 1 - Introduction
Configuration of encoder settings and integrated management of multiple encoders on the IDIS Solution Suit Compact program (network integration solution) Remote control of connection device on the IDIS Center and IDIS Solution Suit Compact program (video encoder operates as the keyboard or mouse of the USB-connected device). - Page 9 Part 1 - Introduction Video Encoder Connection Diagram HE-1101 Audio Out Remote Monitoring Remote Recording HDMI Monitor VGA Monitor (IDIS Center, IDIS Web, (IDIS Solution Suite IDIS Solution Suite Compact) Compact)
-
Page 10: Accessories
Part 1 - Introduction Accessories Upon unpacking the product, check the contents inside to ensure that all the following contents are included. HDMI&VGA Video Encoder Manual USB Cable (A to B Type) Rubber feet (4 pack) Overview Front Panel Power LED Network LED Factory Reset Switch 1 Power LED... -
Page 11: Rear Panel
Factory Reset via the IDIS Discovery program: The other settings except for protocol, system log and network settings are now at the original settings it had when it left the factory. - Page 12 Part 1 - Introduction 5 HDMI Input Connect an HDMI output such as PC, POS and video recorder, etc. HDMI output signal is trasmitted through this video encoder using the network port. 6 HDMI Output The input signal is output as an HDMI loop through output. 7 VGA Input Connect an VGA output such as PC, POS and video recorder, etc.
-
Page 13: Part2 - Remote Setup
Enhance pointer precision : Unselect the setting. manual. Register HDMI&VGA encoder on IDIS Center IDIS protocol: program or IDIS Solution Suite Compact program to - Control the encoder over the network from run the remote control function. software installed on a computer or a separate NVR. -
Page 14: Switching Protocols
System settings can also be changed using a remote program. Remote Setup works with the following web Launch the IDIS Discovery program and from the list, browsers when the web browsers support HTML5: select a video encoder whose protocol you wish to Microsoft Internet Explorer version 10 or later, change. -
Page 15: Quick Setup
Part2 - Remote Setup Quick Setup From the Remote Setup screen, select the menu on the left to display the current settings. Select an option under the menu to change the corresponding settings. Once you have changed the settings, click Save to apply the settings. Quick Setup subtab allows you to set up System, Network, Video, Audio, and other basic settings needed for encoder use. -
Page 16: General
There may be some more settings that cannot be changed, too. If you want to change those settings, connect to the encoder by using the IDIS Discovery program. - Opensource Licenses: Click View to see the... -
Page 17: Date/Time
Part2 - Remote Setup Date/Time User/Group Date/Time: Change the encoder’s date/time settings and display formats and configure the time zone and User/Group: Change remote encoder control daylight saving time settings. Click Save to apply the permission settings for users and user groups. changes right away. -
Page 18: Remote Control
– Color Control: Adjust the camera's brightness, contrast, saturation, and hue settings. – Remote Control: Control the connection device on the IDIS Center Program. Change the network settings, enable FEN and security features, and control network bandwidth use. Remote Control... -
Page 19: Fen
Part2 - Remote Setup Type: Select the type of network you are using. If this option has been changed, click Save to apply the current settings, and then restart Remote Setup. If you Select Use FEN to enable the FEN feature. do not restart Remote Setup, the changes afterwards will not be applied. -
Page 20: Port/Qos
By enabling IDIS Web and RTSP ports, you setup to ensure normal operation. will be able to use the IDIS Web program or a media You will not be able to save FEN settings unless player that supports RTSP (Real-Time Streaming you click on the OK button next to the FEN name Protocol) service to connect to the encoder. - Page 21 Use HTTPS: Select this option to apply https protocol- In a WAN environment, it is recommended that you based security on IDIS Web. use the UPnP function if you record video by using Use UPnP: If the encoder is connected to the network the FEN function or FEN connection is not smooth.
-
Page 22: Bandwidth Control
Part2 - Remote Setup Bandwidth Control Security Regulates the cnetwork bandwidth use based on network traffic fluctuations. IP Filtering: Select this option to enable IP Filtering. IP Filtering allows encoder access from certain IP addresses and blocks access from others. Select Network Bandwidth limit and then specify the - Add: Add new IP addresses to Allow List or Deny maximum bandwidth. -
Page 23: Ieee 802.1X
Part2 - Remote Setup SSL: Select this option to enable SSL (Secure Sockets IEEE 802.1X Layer). Enabling this option applies SSL protocol protection on data transmitted out. However, Select the IEEE 802.1X option to enable IEEE 802.1X programs and systems that do not support SSL will network connection authentication. -
Page 24: Video
Part2 - Remote Setup Video Camera Image Sensor Configure Image Sensor settings. Configure Camera, Streaming, Webcasting, MAT, and Privacy Masking options. Mirroring: Select Horizontal Reverse or Vertical Reverse to flip the image horizontally or vertically. Pivot: Select a direction to rotate images 90 degrees clockwise or counterclockwise. -
Page 25: Streaming
Part2 - Remote Setup Compression: Choose the streaming compression Streaming method. The H.265 compression does not support ONVIF Protocol and RTSP. When using H.265 compression, a device that does not support H.265 compression may prevent the screen from being displayed. Resolution: Choose a resolution setting for video streaming. -
Page 26: Webcasting
Part2 - Remote Setup Multi-View Streaming: Designate a specific area of Webcasting the screen and stream images from that area only. (not supported for the primary stream) Click Setup to Use the webcasting service to view live images from the designate a streaming area. -
Page 27: Mat
Part2 - Remote Setup Frame Rate: Designate the frame rate to be used between the end of the Inactivity Period and the next motion detection. When the slow shutter mode is Select the MAT option to use the MAT (Motion Adaptive enabled under Video >... -
Page 28: Privacy Masking
Part2 - Remote Setup Audio Privacy Masking Select Privacy Masking to set up a privacy mask over Configure audio in/out settings. a specific area. The section on which a privacy mask is applied will appear as black when monitoring video. Privacy Masking Setup: Set up privacy masks(up to Input (Select)/... -
Page 29: Event Action
Part2 - Remote Setup Event Action Email Select Email to send out emails. Designate event detection alert actions. SMTP Server/Port: Enter the SMTP server’s IP address (or domain name) and port number you received from the network administrator. If a DNS server has been set up during network configuration, you can enter a domain name instead of an IP address. -
Page 30: Remote Callback
Select FTP Upload to upload .jpg image of the event remote system. detected to an FTP server. Not supported from the IDIS Web program. The camera must be registered to the remote system in order to use the Remote Callback feature. - Page 31 Part2 - Remote Setup - Resolution/Quality: Choose the resolution and quality of the images to upload to the FTP server. Range of resolution settings you can use here can vary depe nding on the resolution setting applied under Video > Streaming. - Base File Name: Enter a name for the files to be uploaded to the FTP server and then choose file identification options.
-
Page 32: Event
Part2 - Remote Setup Event Motion Detection Select Motion Detection to configure motion detection Configure event detection settings. event settings. With motion detection event enabled, motion detections within the designated area will be assumed as events. Sensitivity: Select daytime and nighttime motion detection sensitivity levels. -
Page 33: Trip-Zone
- Remote Callback: Select this option to send a message to a remote system and then select which system to send the message to. Not supported from the IDIS Web program. The camera must be registered to the remote system in order to use the Remote Callback feature. -
Page 34: Audio Detection
- Remote Callback: Select this option to send a message to a remote system and then select which system to send the message to. Not supported from the IDIS Web program. The camera must be registered to the remote system in order to use the Remote Callback feature. -
Page 35: Tampering
- Remote Callback: Select this option to send a message to a remote system and then select which system to send the message to. Not supported from the IDIS Web program. The camera must be registered to the remote system in order to use the Remote Callback feature. -
Page 36: Video Loss
Remote Callback feature. Remote Callback is not supported on IDIS Web. The camera must be registered to the remote system in order to use the Remote Callback feature. Event Action settings must be configured correctly... -
Page 37: Part 3 - Idis Web
Part 3 - IDIS Web IDIS Web is a program that allows you to view and search video from remote locations over the Internet and can be accessed on a Microsoft Internet Explorer. System requirements for running IDIS Web are as follows: ®... - Page 38 Run as administrator option. Otherwise, certain IDIS Web functions might not be available. When running IDIS Web, the bottom section of the screen may get cut off if the address bar or the status bar is shown. In this case, change Internet Options so that the address bar or the status bar is hidden. (Tools...
-
Page 39: Web Live Mode
2013-05-29 16:25:22 Press to terminate IDIS Web. Place the mouse pointer on the logo to check IDIS Web's version. Displays the current time. Click to view the video in full screen. Press the ESC key on the keyboard to return to the previous screen. - Page 40 Part 3 - IDIS Web Shows login information. Indicates the camera's number. This function is not supported. Used to adjust live video quality. Click to control the alarm out device connected to the camera. Event status window at the bottom of the screen displays a list of events detected at remote locales.
-
Page 41: Part 4 - Appendix
Part 4 - Appendix Setup Menu Tree (Remote Setup) Remote Setup Quick Setup System Network Video Audio System General Date/Time User/Group Network IP Address Port/QoS Bandwidth Control Security IEEE 802.1X Video Camera Streaming Webcasting Privacy Masking Audio Input Event Action Email Remote Callback FTP Upload... -
Page 42: Specifications
PSE device that the LAN cable is connected to.. Check the LAN cable. The system is unable to recognize network interface Check the network LED. Specifications Model HE-1101 Input HDMI, VGA Compression H.264, H.265 Video Bitrate Control CBR, VBR... - Page 43 Part 4 - Appendix Supported Resolutions V1.1...
- Page 44 IDIS Co., Ltd. For more information, please visit at www.idisglobal.com...