Remote Control; Network; Ip Address - Idis HE-1101 User Manual

Part2 - Remote Setup
User/Group settings can only be configured by
users belonging to the Administrator group.
There is no default password for the Administrator
group's admin user.
Standard groups (Administrator, Operator, and
User) cannot be edited or deleted. Authorities
assigned here apply identically to ONVIF protocol
user groups.
Group authorities that can be assigned are as
follows:
– Upgrade: Upgrade the system.
– Setup: Configure the system's settings.
– Color Control: Adjust the camera's brightness,
contrast, saturation, and hue settings.
– Remote Control: Control the connection device
on the IDIS Center Program.

Remote Control

If the mouse pointer of the control target and the one of
the live screen do not match, check the remote control
target's Control Panel > Mouse Properties and then
select Manual Setup as shown above.
For more information on configuring
mouse setup, refer to USB Remote Control
(Keyboard/Mouse) on page 13.
Manual Setup : Set the releated settings manually.
Display Resolution : Match Control Panel > Screen
Resolution of remote control target.
18

Network

Change the network settings, enable FEN and security
features, and control network bandwidth use.

IP Address