Before reading this manual This operation manual contains basic instructions on installing and using DirectIP™ VA in the Box, an IDIS product. Users who are using this product for the first time, as well as users with experience using comparable products, must read this operation manual carefully before use and heed to the warnings and precautions contained herein while using the product.
Safety Precautions Safety Precautions Important Safeguards 13. Servicing Do not attempt to service this equipment yourself. Refer all servicing to qualified service personnel. 1. Read Instructions 14. Damage requiring Service All the safety and operating instructions should be read before the Unplug this equipment from the wall outlet and refer servicing to appliance is operated.
Safety Precautions Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g., use of power strips). In-Text Symbol Type Description Caution Important information concerning a specific function. Note Useful information concerning a specific function. User’s Caution Statement Caution: Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
Page 5
Safety Precautions WEEE (Waste Electrical & Electronic Equipment) Correct Disposal of This Product (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
Part 1 – Introduction Product Features This VA in the Box (VA Box) analyzes the live video from DirectIP cameras and transmits the video over Ethernet connections. This product offers the following features: • Video Inputs : 4-channel H.264 and H.265 IP camera •...
Page 9
Example 1 : VA Box Connection Diagram Using PoE Switch Network Camera CONSOLE DIAG RESET / PoE PoE Switch VA Box (DV-1104) NVR (Network Video Recorder) Example2 : VA Box Connection Diagram Using PoE Switch Network Camera CONSOLE DIAG RESET...
Page 10
Example 3 : VA Box Connection Diagram Using PoE Switch Network Camera CONSOLE DIAG RESET / PoE VA Box (DV-1104) PoE Switch NVR (Network Video Recorder) Example 4 : VA Box Connection Diagram without PoE Switch Network Camera VA Box (DV-1104)
Part 1 – Introduction Accessories Upon unpacking the product, check the contents inside to ensure that all the following contents are included. • VA in the Box • User Guide and Instruction Manual (This document) • Rubber Foot (4EA) Overview Front Panel Power LED Network LED...
• Factory Reset during system operating: The other settings except for system log are now at the original settings it had when it left the factory. • Factory Reset via the IDIS Discovery program: The other settings except for system log and network settings are now at the original settings it had when it left the factory.
DirectIP™ NVR, refer to the VA in the Box Setup via NVR on page 18 . • For more information about video analysis report, refer the Video Analysis Report (VA Box) via IDIS Center Program on page 22. Firmware Upgrade...
Part 3 - Appendix Part 3 - Appendix Camera Installation Guidlines for VA Box General Guidlines In order for the camera and, in effect, the functions of the VA Box such as Heat Map, People Counting and Queue Management to operate properly, make sure that the following information is applicable. It applies to People Counting, Heat Map and Queue Management function of the VA Box.
Page 15
Part 2 - Remote Setup 3 Do not mount the camera, for instance, above an escalator or the floor is moving. [Avoid having moving objects such as an escalator steps in the setting area.] 4 Make sure that no doors or other items are moving in the event area. [Avoid having the camera blocked when you open the door]...
Page 16
Part 2 - Remote Setup The People Counting, Queue Management and Heatmap functions of the VA in the Box are intended to collect statistical baseline data for marketing purposes, not for real-time accuracy purposes. There may be erros in the actual measurement. In the following conditions, a detection performance may be reduced.
Page 17
Part 2 - Remote Setup People Counting, Queue Manament Camera Installation The camera should be mounted straight above the place where people should be counted and should be looking straight down. [Mount the camera facing straight down] It will not count objects under about 110 to 130 cm of height depending on the camera model (Only for People Counting function).
Page 18
°C 5~35 NVR and Camera Compatibility Only IDIS cameras that supports DirectIP are supported and some models may not be supported. NVR and camera compatibility contents are subject to change without notice. Contact your retailer for the latest compatibility chart.
Page 19
Part 2 - Remote Setup VA Box Setup Device Scan Scan the device under Registration - Scan. VA Box can only analyze the video from the camera using H.264 and H.265.. Registration You can register VA Box at remote locales. •...
Page 20
Part 2 - Remote Setup People Counting Queue Management Count the number of people passing through the line Manage the number of people and extend of stay in the (designated border) on the live screen. the setting zone. Use the left mouse button to define the zone.
Page 21
Reboots the camera. - Soft Reset: Types in the installation manual for more details. Access the clients such as the IDIS Center to check • The VA Box will reboot after the upgrade and then the analysis results. reconnect automatically.
Page 22
Part 2 - Remote Setup Video Analysis Report (VA Box) via IDIS Center Program Searches video analysis information and analyze with graphs and images by using devices connected to VA Box. Video Analysis Report is supported in the VA Box panels (max. 3). Select New Tab from the System menu and click VA Box to add a tab.
Page 23
Part 2 - Remote Setup Report Toolbar Use the toolbar at the bottom of the panel to search a specific VA report. • From, To: Set the date and time of the VA report to search for. Enter a specific date and time or select First or Last options.
Part 2 - Remote Setup : Move backward by 1 year (Month), 1 week (Day), 1 day (Hour) according to the search period unit. • : Move forward by 1 year (Month), 1 week (Day), 1 day (Hour) according to the search period unit. •...
Page 25
Part 2 - Remote Setup Heat Map • Zone User Edit: Edit a heat map zone. Check the box to define the zone with a mouse click. Specify the area on the still image with the left mouse button, and click the first point or the right mouse button to complete defining the zone.
Page 26
• Check that the power cable is connected or the NVR has power. • Check the LAN cable. The system is unable to recognize network interface • Check the network LED. Specifications Model DV-1104 Input 1 RJ-45 Video Compression H.264 / H.265 Ethernet...
Page 27
IDIS Co., Ltd. For more information, please visit at www.idisglobal.com...