Switching Protocols; Remote Setup - Idis HE-1101 User Manual

Part2 - Remote Setup

Switching Protocols

1
Launch the IDIS Discovery program and from the list,
select a video encoder whose protocol you wish to
change.
2
Click on the Setup
Protocol Setup.
Alternatively, you can right-click on the mouse and
select Protocol Setup.
3
From the Protocol Setup screen, select the desired
protocol and then click OK.
4
This will activate the selected protocol. You can
check each encoder's protocol on the IDIS Discovery
program.
This operation manual was written based on the IDIS
protocol use.
14
icon and then select Setup

Remote Setup

1
Launch the IDIS Discovery program and then from
the main screen, select a network encoder whose
settings you wish to change.
2
Click on the Setup
3
Select Remote Setup from the Setup menu to load
the Remote Setup screen. Alternatively, you can
select encoder from the main screen and then right-
click to access the Remote Setup screen.
System settings can also be changed using a remote
program.
Remote Setup works with the following web
browsers when the web browsers support HTML5:
Microsoft Internet Explorer version 10 or later,
Google Chrome, Mozilla Firefox, or Apple Safari.
It may not work properly with Microsoft Internet
Explorer version 9.0 or earlier. It is recommended
that you update the web browser to the latest
version. When you launch Remote Setup on a
Microsoft Internet Explorer version 10 or later
supporting HTML5 and the Remote Setup screen
does not appear, check if the web browser's
document mode is set to 9 or higher or Edge. You
can check the document mode as follows: Press the
F12 key on the keyboard
mode icon.
icon.
click the Document