Idis HE-1101 User Manual page 12

Part 1 - Introduction
5 HDMI Input
Connect an HDMI output such as PC, POS and video recorder, etc. HDMI output signal is trasmitted through this video
encoder using the network port.
6 HDMI Output
The input signal is output as an HDMI loop through output.
7 VGA Input
Connect an VGA output such as PC, POS and video recorder, etc. VGA output signal is trasmitted through this video
encoder using the network port.
8 VGA Output
The input signal is output as a VGA loop through output.
The network connector is not designed to be connected directly with cable or wire intended for outdoor use.
Press down on the button and insert the cable into the opening when you connect the power connectors. Release the
button and then pull on the cable slightly to ensure it is held securely in place. To disconnect the cable, press down on the
button again and pull the cable out.
Ground the power port's ground terminal before use.
Organize the power cable so that it will not cause people to trip over or become damaged from chairs, cabinets, desks, and
other objects in the vicinity. Do not run the power cable underneath a rug or carpet.
Do not connect multiple devices to a single power outlet.
12