Event Monitoring; Context Menu Access; Edit Group - Idis DP-DD1316 Operation Manual

Part 2 - Getting Started
• While in one push, the message "Focusing... " will prompt
on the screen.
• Drag and drop to reposition the PTZ Tools window.
• Select the icon to hide the PTZ Tools window.

Event Monitoring

When an event occurs, the video decoder automatically displays
the channel linked to the event and shows the
system status area on the lower left part of the screen. To use the
Event Monitoring feature, navigate to Display > Monitor and
enable Event Monitoring. Event Monitoring remains in effect
throughout the entire Event Monitoring Time. After that, the
video decoder will return to the previous screen if a new event
does not take place. Pressing the Layout or a Camera button
before the end of the Event Monitoring Time reverts the
system to Live mode.
18
PTZ Camera Pan and Tilt
Zoom In/Out
Focus Near / Far
IRIS Open / Close
One Push
Move to Preset
Advanced PTZ
icon on the

Context Menu Access

While in Live mode, ,right-click on the mouse to access the
Context menu.
• PTZ: Access PTZ controls.
• Zoom: Zoom in.
• Information: Select a network channel to display
information about the selected channel's device.
• Edit Group: Rearrange the split screen layout.
• Login/Logout: Log into the account or log out of the
account.
• Color Control: Select a channel to display its Color Control
window. Adjust the selected camera's brightness, contrast,
saturation, and hue settings.
• Self-Adjusting Video Mode: Select the image preset (Natural,
Vivid, Noise Reduction) and you can control it directly.

Edit Group

Edit Group lets you customize split screen pages in Live mode.
1
While displaying a split screen page, select the Edit Group
option from the context menu. A yellow border is drawn
around the page. Use the mouse to select a different page.
2
Press a Camera button or select a camera after pressing
the Menu button. Selected camera is then loaded on to the
selected page. Repeat to assign other channels to the page.
3
Right-click on the mouse, open up the Context Menu and
then select Exit Group Edit to exit.