Part 2 - Remote Setup
Part 2 - Remote Setup
Configure basic VA Box settings and all other system
settings.
• Screen images may vary depending on the model.
• When using the camera with Intelleigent Codec, it
could delay the image analysis up to 10 seconds.
• MAT (Motion Adaptive Transmission) function is
active, the image analysis may not work normally.
• It is recommended that you do not use MAT
function to increase the accuracy of image analysis.
Camera Protocol
VA Box supports DirectIP™ protocol.
• DirectIP™ protocol:
- Using with a DirectIP™ NVR enables VA Box use
without the need to configure network settings.
- The DirectIP™ NVR also allows you to control all
VA Box settings directly from the NVR, without the
need for a computer.
• For more information on configuring VA Box
settings from a DirectIP™ NVR, refer to the VA in the
Box Setup via NVR on page 18 .
• For more information about video analysis report,
refer the Video Analysis Report (VA Box) via IDIS
Center Program on page 22.
Firmware Upgrade
Refer to the
Upgrade on page 21 to perform a firmware
upgrade.
13