Installation & User's Manual
FOCUS AND BEAM ADJUSTMENTS
1. Lens Tube Removal and Installation
It is easy and quick to change to the lens tubes on a PLPROFILE4 MKII LED Luminaire. Fixed beam and zoom lens
tubes are interchangeable.
To remove and install lens tubes:
Step 1. Loosen (but do not remove) move lens knob(s) towards front of lens tube assembly. See
Adjustments (Zoomspot Models)" on page 13
Step 2. As illustrated Figure 5, side lens tube locking catch forward.
Lens Tube Lock
Step 3. Lift lens tube assembly up and away from light engine assembly.
2
Step 4. To install perform process in reverse.
CAUTION: Ensure the lens tube locking catch is fully engaged and safety cable is attached before putting fixture
into use. For safety cable attachment, refer to
1 2
FOCUS AND BEAM ADJUSTMENTS
Lens Tube Assembly
Figure 5: Lens Tube Assembly Removal - Lens Locking Catch
1
Figure 6: Lens Tube Assembly Removal
"Safety Cable Use" on page 11
PLPROFILE4 MKII LED Luminaires
for more information.
for more information.
"Zoom and Focus