Mitel TA7102 Installation Manual page 17


The cabling is away from the following:

Sources of electrical noise such as radios, transmitters, and broadband amplifiers.

Power lines and fluorescent lighting fixtures.

Water or moisture that could enter the casing of the TA7102.

The airflow is not restricted around the TA7102 or through the vents of the unit. The unit requires a
minimum of 25 mm (1 in.) clearance.

The operating temperature is between 0°C and 40°C.

The humidity is not over 85% and is non-condensing.
Wiring Requirements
Make sure that the telephone wiring, LAN and WAN cables reach the device and can be dressed in a
manner that is safe for the wiring, does not pull or create lateral stress on the connectors on the device,
and does not present a trip hazard to personnel working in the vicinity of the equipment. Do not connect
any cable or wiring at this time.
153/1531-ANF 901 14 B 2017-03-08
TA7102 Hardware Installation