Mitel TA7102 Installation Manual page 11

Rear Connectors
The TA7102 has several connections that must be properly set. Figure 2 shows the rear panel of the
TA7102.
Figure 2: TA7102 Rear Panel Connectors
Table 3 describes the rear panel connections (from left to right).
Table 3: Rear Connections of the TA7102
1.
2.
3.
4.
153/1531-ANF 901 14 B 2017-03-08
Standards Supported - ITU-T I.430 Basic user-network interface - Layer 1 specification
(section 9).
Connection
Phone-Fax 1 / Phone-
Fax 2
LAN
WAN
Reset / Default switch Resets configuration parameters of the TA7102 to default
1 2
Description
Two RJ-11 connectors to attach a conventional telephone or G3
fax machine.
A 10/100 BaseT Ethernet RJ-45 connector that can be
connected into the network card of a computer.
A 10/100 BaseT Ethernet RJ-45 connector for access to a LAN,
WAN or computer.
(known) values. It can be used to reconfigure the unit.
Warning: Read Section "RESET/DEFAULT Button" before
attempting to reset the unit.
TA7102 Hardware Installation
3 4 5
11