Roland RS-50 Owner's Manual page 74

Adding effects
Parameter Value
Balance D100:0W–
D0:100W
Level 0–127
16: STEP FLANGER
The Step Flanger effect is a flanger in which the flanger pitch
changes in steps.
fig.MFX-16
Balance D
L in
Step Flanger
Feedback
Feedback
Step Flanger
R in
Balance D
Parameter Value
Pre Delay 0.0–100 [ms]
Rate 0.05–10.00 [Hz] Adjusts the rate of modulation.
Depth 0–127
Feedback # -98– +98 [%]
Step Rate # 0.1–20.0 [Hz],
note *2
Phase 0–180 [deg]
Balance D100:0W–
D0:100W
Reset OFF, ON
Level 0–127
74
Description
Adjusts the volume balance be-
tween the direct sound and the
flanger sound.
With a setting of D100:0W only the
direct sound will be output, and
with a setting of D0:100W only the
flanger sound will be output.
Adjusts the output level.
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Description
Adjusts the time delay from
when the direct sound begins
until the flanger sound is heard.
Adjusts the depth of modula-
tion.
Adjusts the amount (%) of the
flanger sound that is returned
(fed back) into the input.
Negative (-) settings will invert
the phase.
Adjusts the rate (period) of pitch
change.
Adjusts the spatial spread of the
sound.
Adjusts the volume balance be-
tween the direct sound and the
flanger sound.
With a setting of D100:0W only the
direct sound will be output, and
with a setting of D0:100W only the
chorus sound will be output.
This setting determines whether
the period for the pattern is reset
(ON), or not (OFF) when sounds
are played.
While the rhythm guide is play-
ing, the period for the pattern is
not reset even if you set this ON.
Adjusts the output level.
17: St DELAY (Stereo Delay)
This is a stereo delay.
When Feedback Mode is NORMAL:
fig.MFX-17a
Balance D
L in
Delay
Feedback
Feedback
Delay
R in
Balance D
When Feedback Mode is CROSS:
fig.MFX-17b
Balance D
L in
Delay
Feedback
Feedback
Delay
R in
Balance D
Parameter Value
Feedback Mode NORMAL,
CROSS
Delay Left 0–420 [ms],
note *1
Delay Right 0–420 [ms],
note *1
Phase Left NORMAL,
INVERT
Phase Right NORMAL,
INVERT
Feedback # -98– +98 [%]
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Description
Selects the way in which delay
sound is fed back into the effect.
NORMAL: The left delay sound
will be fed back into the left de-
lay, and the right delay sound
into the right delay.
CROSS: The left delay sound
will be fed back into the right de-
lay, and the right delay sound
into the left delay.
Adjusts the time from the direct
sound until when the left delay
sound is heard.
Adjusts the time from the direct
sound until when the right delay
sound is heard.
Selects the phase of the left delay
sound.
NORMAL: Phase is not
changed.
INVERT: Phase is inverted.
Selects the phase of the right de-
lay sound.
NORMAL: Phase is not
changed.
INVERT: Phase is inverted.
Adjusts the proportion (%) of
the delay sound that is fed back
into the effect.
Negative (-) settings will invert
the phase.