Roland RS-50 Owner's Manual page 82

Adding effects
36: CHORUS>DELAY
This effect connects a chorus and a delay unit in series.
fig.MFX-36
Balance D
L in
Balance W
Chorus
Balance W
R in
Balance D
Parameter Value
Cho Delay 0.0–100 [ms]
Cho Rate 0.05–10.00 [Hz] Adjusts the modulation speed of
Cho Depth 0–127
Cho Balance # D100:0W–
D0:100W
Delay Time 0–500 [ms]
Dly Feedback -98– +98 [%]
Dly HF Damp 200–8000 [Hz],
BYPASS
Dly Balance # D100:0W–
D0:100W
Level 0–127
82
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Adjusts the time delay from
when the direct sound begins
until the chorus sound is heard.
the chorus effect.
Adjusts the modulation depth of
the chorus effect.
Adjusts the volume balance be-
tween the direct sound and the
chorus sound.
With a setting of "D100:0W,"
only the direct sound will be
output. With a setting of
"D0:100W," only the chorus
sound will be output.
Adjusts the time delay from
when the direct sound begins
until the delay sound is heard.
Adjusts the proportion (%) of
the delay sound that is fed back
into the delay input.
Negative (-) settings will invert
the phase.
Adjusts the frequency above
which delayed sound fed back
to the delay input will be cut.
If you do not want to cut the
high frequencies of the feed-
back, set this parameter to BY-
PASS.
Adjusts the volume balance be-
tween the chorus sound that is
sent through the delay and the
chorus sound that is not sent
through the delay.
With a setting of "D100:0W,"
only the chorus sound will be
output. With a setting of
"D0:100W," only the chorus
sound that is sent through the
delay will be output.
Adjusts the output level.
37: FLG>DELAY (Flanger
This effect connects a flanger and a delay in series.
fig.MFX-37
Balance D
L in
Feedback
Balance W
Flanger
Balance W
R in
Balance D
Parameter Value
Flg Delay 0.0–100 [ms]
Flg Rate 0.05–10.00 [Hz] Adjusts the modulation speed of
Flg Depth 0–127
Flg Feedback -98– +98 [%]
Flg Balance # D100:0W–
D0:100W
Delay Time 0–500 [ms]
Dly Feedback -98– +98 [%]
Dly HF Damp 200–8000 [Hz],
BYPASS
Dly Balance # D100:0W–
D0:100W
Level 0–127
→
Delay)
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Adjusts the time delay from
when the direct sound begins
until the flanger sound is heard.
the flanger effect.
Adjusts the modulation depth of
the flanger effect.
Adjusts the proportion (%) of
the flanger sound that is fed
back into the effect.
Negative (-) settings will invert
the phase.
Adjusts the volume balance be-
tween the direct sound and the
flanger sound.
With a setting of "D100:0W,"
only the direct sound will be
output. With a setting of
"D0:100W," only the flanger
sound will be output.
Adjusts the time delay from
when the direct sound begins
until the delay sound is heard.
Adjusts the proportion (%) of
the delay sound that is fed back
into the delay input.
Negative (-) settings will invert
the phase.
Adjusts the frequency above
which delayed sound fed back
to the delay input will be cut.
If you do not want to cut the
high frequencies of the delay
feedback, set this parameter to
BYPASS.
Adjusts the volume balance be-
tween the flanger sound that is
sent through the delay and the
flanger sound that is not sent
through the delay.
With a setting of "D100:0W,"
only the flanger sound will be
output. With a setting of
"D0:100W," only the flanger
sound that is sent through the
delay will be output.
Adjusts the output level.