Table of Contents
Advertisement
Set the Time, Date & Units
Press the " " button, located on the front of the display, to enter SET MODE.
Once in set mode, the preference you are currently setting will blink on the display.
To adjust the currently selected (flashing) item, press and release the "
"
" buttons (press and HOLD to fast adjust).
V
To save your adjustments, press and release the " " button again to adjust the
next preference. The preference set order is as follows:
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE UNITS (°F or °C)
WIND SPEED UNITS (mph, km/h, knots)
RAINFALL UNITS (inches or mm)
PRESSURE UNITS (inHg or hPa)
You will automatically exit SET MODE if no buttons are pressed for 20 seconds.
Enter setup mode at any time by pressing the " " button.
Display Backlight Settings
This weather station's color display features three different lighting settings:
High (100%) brightness, Medium (60%) brightness and Low (15%) brightness.
When display is powered with the power adapter, backlight remains on at
100% brightness. Press the "
again to dim to 15%, press a third time to enter AUTO-DIM mode. "
appear next to the clock.
NOTE: Pressing and holding the "
backlight. Once any button is pressed, the backlight will return to your selected
setting.
AUTO DIM MODE:
" button once to dim to 60% brightness; press
" button for 5 seconds will disable the
Automatically adjusts display brightness based on time of day.
6:00 a.m. - 9:00 p.m. = 100% brightness
9:01 p.m. - 5:59 a.m.= 15% brightness
9
" or
" will
Advertisement
Table of Contents
