Troubleshooting Host Connectivity
The local operator panel reboots automatically after an unsuccessful second
calibration and restores the previously saved alignment.
Resetting the Local Operator Panel to Factory Settings
Log into the local operator panel.
1.
In SLC, select Tools > Calibrate.
2.
Click Reset Calibration. The local operator panel reboots.
3.
Troubleshooting Host Connectivity
Use a sniffer (a device or program that traces the network traffic for the library).
■
Display the port statistics on the switch or router connected to the library. Search
■
for any errors.
Run a trace with the library management software that displays host-to-library
■
packets and transmissions.
Verify that two separate hosts are not competing to manage one library or one
■
partition. To view current host connections, see
Status"
16-8 StorageTek SL8500 Library Guide
on page 13-1. Click the HLI tab.
"Viewing Library Operational