Selecting The Video Output Destination (Output Select); Selecting The Screen That Is Shown When Slide Show, Digiscore, Or Piano Roll Are Off (Video Out Mode); Connecting A Portable Audio Player - Roland RM-700 Owner's Manual

Selecting the Video Output Destination
(Output Select)
Here's how to choose whether the image will be shown on a
television connected to the Video Out jack or an external display
connected to the Analog RGB Out connector.
Setting Explanation
RGB Analog RGB Out connector
Video Video Out jack
If both an external display and a television are connected
simultaneously, the image will appear incorrectly on both the
external display and the television.
Selecting the Screen that is Shown when
Slide Show, DigiScore, or Piano Roll are off
(Video Out Mode)
Here you can specify what will be shown on the external display,
television when the Slide Show, DigiScore, and Piano Roll are off.
Setting Explanation
The RM-700's display will show the same image as the
Panel
television or display that is connected to the RM-700.
ROLAND "Roland" will be displayed.
Black Nothing will be displayed.

Connecting a Portable Audio Player

You can connect a portable audio player to the Roland Audio Port,
and the music is heard from the RM-700's speakers.
1.
Turn the front right bottom panel Roland Audio Port
volume knob all the way toward the left to minimize the
volume.
2.
Connect your portable audio player to the front right
bottom panel Roland Audio Port.
Portable audio player
3.
In the song selection screen, choose "New Song (p. 77)."
4.
Start playback on your portable audio player, and adjust
the volume with the Roland Audio Port [Volume] knob.
5.
If you want to decrease the vocal portion of the music
from the portable audio player, press the [Center Cancel]
button so its indicator is lit.
• You can change the pitch of the portable audio player. For details,
refer to "Transposing Keyboard Sounds and Songs Played Back
(Transpose)" (p. 122).
Connecting External Devices
R L
Red White
195