Table of Contents
Advertisement
Performance
Selecting the Part to Which the Effect is Added (EffectsPart)
You may find effects not being applied to certain parts when different effects are applied to the upper tone, layer tone, and lower
tone. In such instances, you can select which effect is to have priority.
1.
Press the Tone button to select a Tone (p. 34).
The Tone selection screen appears.
2.
Touch <Effects>.
The "Effects" screen appears.
3.
Touch <Part>.
The "EffectsPart" screen appears.
4.
Touch
Setting
Upper,
Layer1, Layer2,
Lower1, Lower2
5.
Press the [Exit] button when you've finished making settings.
48
to select the part to which the effect is added.
Explanation
The effect will be applied to the selected part and other parts to which the same effect has been applied.
Advertisement
Table of Contents
