Table of Contents
Advertisement
Recording and Saving the Performance
7.
Touch <Add On>.
The following screen appears.
Selecting the Track to Record
8.
Press the track button for the track that you want to record (i.e., the track that you want to play yourself).
The indicator of the button you pressed will blink, and the RM-700 enters recording-standby mode.
Since in this example we will record the upper part performance, press the [Right] button to make the button's indicator light blink.
Only the automatic accompaniment and the drum set or SFX set can be recorded to the [Accomp] button.
Start Recording
9.
Press the [
A two-bar count-in plays, then recording starts.
Even without pressing the [
when you start by playing rather than pushing the [
When recording starts, the [
Stop Recording
10.
Press the [
Recording stops.
Play Back the Recorded Performance
11.
Press the [
The recorded performance is played back.
When you press the [
130
(Play/Stop)] button.
(Play/Stop)] button, recording starts when you play the keyboard. There is no count-in played
(Play/Stop)] and [
(Play/Stop)] button.
(Prev)] button, then press the [
(Play/Stop)] button, playback stops.
(Play/Stop)] button.
(Rec)] buttons' indicators light up.
(Play/Stop)] button.
Advertisement
Table of Contents
