Selecting The Partials That Sound (Partial Switch); Selecting The Partials To Edit (Partial Select); Initializing A Partial (Partial Initialize); Copying A Partial (Partial Copy) - Roland FA-07 Reference Manual

Selecting the Partials That Sound
(Partial Switch)
You can select the partials/waves that are sounded by a
SuperNATURAL synth tone, PCM synth tone, or PCM drum kit.
1.
In the TONE EDIT screen (p . 46), press the
button .
2.
Use the [4] (Sw 1)–[7] (Sw 4) buttons to select the partials/
waves that you want to sound, and then press the [2]
(Exit) button .
MEMO
• For a SuperNATURAL synth tone, you can use the
(Sw 3) buttons to select partials.
• You can use the pads to select partials (p. 84).
Selecting the Partials to Edit (Partial
Select)
Here's how to select the partials of a SuperNATURAL synth tone,
SuperNATURAL drum kit, PCM synth tone, or PCM drum kit.
1.
In the TONE EDIT screen (p . 46), press the
button .
2.
[4] (Select 1)–[7] (Select 4)
Use the
partials that you want to edit, and then press the
button .
*
You can't turn off all of the partials.
MEMO
•
For a SuperNATURAL synth tone, you can use the
1)–[7] (Select 3) buttons to select partials.
• For a SuperNATURAL drum kit, you can select only one partial.
•
You can use the pads to select partials (p. 84).
[2] (Partial Sw)
[5] (Sw 1)–[7]
[3] (Partial Sel)
buttons to select the
[2] (Exit)
[5] (Select
Initializing a Partial (Partial
Initialize)
Here's how to initialize a partial of a SuperNATURAL synth tone,
SuperNATURAL drum kit, PCM synth tone, or PCM drum kit.
1.
In the TONE EDIT screen (p . 46), press the
button .
2.
Select "Partial Initialize"
3.
Select the partial that you want to initialize, and press the
[7] (Select) button .
A confirmation message appears.
If you decide to cancel, press the
4.
Press the [6] (OK) button .
The partial is initialized.
NOTE
Never turn off the power while initialization is in progress.

Copying a Partial (Partial Copy)

Here's how to copy the partial settings of a SuperNATURAL synth
tone, SuperNATURAL drum kit, PCM synth tone, or PCM drum kit.
1.
In the TONE EDIT screen (p . 46), press the
button .
2.
Select "Partial Copy" and press the
3.
Select the copy-source partial and copy-destination
partial .
A confirmation message appears.
If you decide to cancel, press the
4.
Press the [6] (OK) button .
The partial is copied.
Editing a Tone
[5] (Tone Utility)
and press the [7] (Select) button .
[7] (Cancel) button.
[5] (Tone Utility)
[7] (Select) button .
[7] (Cancel)
button.
49