Table of Contents
Advertisement
Splitting the Keyboard Into Vocal Designer and Ensemble Zones
Here's how to split the keyboard so the Vocal Designer and Ensemble parts can be played from separate
zones.
1.
Press [F1] (EDIT) button in the top screen.
*
Please be aware that in the screen shots shown in this document, the registration names and tone
names diff er from the factory settings.
2.
Press the cursor buttons to move the cursor to "Split."
3.
Turn the value dial to turn "Split" ON.
4.
Press the cursor buttons to move the cursor to "Split Point."
If you set the Split Point to "60 (C4), " the keyboard will be divided as follows.
VOCAL DESIGNER
5.
Use the value dial to change the value of "Split Point."
6.
When you've fi nished making settings, press the
[EXIT] button.
7.
If you want to save the edited settings, press the [F2] (WRITE) button
to save the registration.
For details on saving, refer to "Saving a Registration" (p. 81).
54
ENSEMBLE
Split Point: C4
*
With the cursor located on the registration number,
press the [F1] (EDIT) button.
✍
If Split is turned on, the [
the top screen.
(SPLIT)
] icon is shown in
Advertisement
Table of Contents
