Playing The Vocal Designer Using Only The Microphone (Auto Note) - Roland VP-770 Owner's Manual

Playing the Vocal Designer Using Only the Mic rophone
Normally, Vocal Designer will not sound unless you play the keyboard. However, by using the Auto Note
function, you can make Vocal Designer produce sound without your having to play the keyboard; i.e., all
you'll need to do is vocalize into the microphone. The Auto Note function will detect the pitch of your voice
via the microphone, and automatically sound notes for that pitch.
When you press the [AUTO NOTE] button, the button will light and
the Auto Note function will turn on.
Making settings for Auto Note
1.
Hold down the [SHIFT] button and press the [AUTO NOTE] button.
The AUTO NOTE setting screen will appear.
2.
Use the cursor buttons and the value dial to change the value.
Parameter
MODE
KEY
3.
When you've fi nished making settings, press the [EXIT] button.
38
Value Description
CHROMATIC This is a chromatic scale. The pitch detected from the microphone is converted to
notes at semitone intervals.
DIATONIC This is a diatonic scale. The pitch detected from the microphone is converted to notes
at diatonic intervals. You can use the KEY parameter to specify the key of the scale.
C, C#, D, D#, E, F, F#, G, G#, Specifi es the key when MODE is set to "DIATONIC" (diatonic scale).
A, A#, B
( AUTO NOTE)
✍
When you turn on the [AUTO
NOTE] button and vocalize
into the microphone, the
detected pitch is shown as
a [ ] icon on the keyboard
displayed on this screen.