Table of Contents
Advertisement
V-LINK Settings
1.
Press the [V-LINK] button.
2.
Press the [F1] (EDIT) button.
V-LINK EDIT screen will appear.
3.
Use the cursor buttons and the value dial to change the value.
Parameter
Value
Tx Ch
Ch1–Ch16
Speed
0.0-1.0-2.0, 0.5-1.0-2.0, 0.0-1.0-4.0,
0.5-1.0-4.0,0.0-1.0-8.0, 0.5-1.0-8.0,
0.0-1.0-16.0, 0.5-1.0-16.0, 0.0-1.0-32.0,
0.5-1.0-32.0, 0.0-2.0-4.0, 0.0-4.0-8.0,
0.0 8.0-16.0, 0.0-16.0-32.0, -1.0-0.0-1.0,
-2.0-1.0-4.0, -6.0-1.0-8.0
Local Sw
ON, OFF
3.
If you want to save your settings, press the [F2] (SYS WRITE) button.
For details on saving, refer to "Saving the System Settings" (p. 96).
4.
When you've fi nished making settings, press the [EXIT] button.
Description
MIDI channel that will control the V-LINK device.
Range of video playback speed
The three values are the playback speeds (multiples of normal speed) at
the left, center, and right positions of the pitch bend.
When V-LINK is on, this setting specifi es whether the far-left octave of
keys will play sounds (ON) or not (OFF).
*
This parameter is not saved in system memory. It will always be ON
when the VP-770 starts up.
119
Advertisement
Table of Contents
