Auxiliary Mode; Tips On Saving Energy; Operation Condition - Sharp AH-XP10UXD Operation Manual

AUXILIARY MODE

Use this mode when the remote control
is not available.
TO TURN ON
Press the AUX button.
• The green OPERATION lamp (
up and the unit will start operating in the
AUTO mode.
• The fan speed and temperature setting are
set to AUTO.
TO TURN OFF
Press the AUX button again.
• The green OPERATION lamp (
off.

TIPS ON SAVING ENERGY

Below are some simple ways to save
energy when you use your air conditioner.
Set the proper temperature
• Setting the temperature lower than necessary
during cooling operation will result in
increased power consumption.
Block direct sunlight and prevent drafts
• Blocking direct sunlight during cooling operation
will reduce power consumption.
• Close the windows and doors during cooling
and heating operations.
Keep filter clean to ensure the most
efficient operation
Disconnect the power cord when the
unit is not used for an extended period
time
• The indoor unit still consumes a small amount
of power when it is not operating.

OPERATION CONDITION

Mode
Cooling
• The build-in safety device may prevent the
) will light
unit from operating when used out of this
range.
• Condensation may form on the air outlet if the
unit operates continuously in the COOL or
DRY mode when humidity is over 80%.
) will turn
AUX
EN-5
Indoor
Temp.
Upper limit 32°C
Lower limit 21°C
Outdoor
Temp.
43°C
21°C