Adjusting The Air Flow Direction - Sharp AH-XP10UXD Operation Manual

ADJUSTING THE AIR FLOW DIRECTION

VERTICAL AIR FLOW DIRECTION
1
Press the SWING button (
the desired airflow direction.
In AUTO mode, airflow direction cannot be
set to " ".
) to set
SENSOR
1
EN-7
HORIZONTAL AIR FLOW DIRECTION
(For Premium models)
1
Press the SWING button (
• The horizontal airflow louver will swing.
• The lighting bar will wave to show the
swing direction.
For more information, refer to page EN-13.
(For XP10/13UXD, XP10/15UF models only)
2
Press the SWING button (
to stop at the desired position.
CAUTION:
Never attempt to adjust the louvers manually.
• Manual adjustment of the louvers can cause
the unit to malfunction.
• When the vertical adjustment louver is
positioned at the lowest position in the COOL
or DRY mode for an extended period of time,
condensation may result.
NOTE:
• The adjustment range is narrower than the
swing range in order to prevent condensation
from dripping.
(For Standard models)
Hold the horizontal airflow louver lever
and adjust the airflow direction.
Louver lever
).
SENSOR
) again
1
2