Midi Transmit Channel Settings (Midi Transmit Channel); Sending Recorded Performance Data To A Midi Device (Composer Midi Out) - Roland DP-990 Owner's Manual

Various Settings
MIDI Transmit Channel Settings
(MIDI Transmit Channel)
This setting specifies the MIDI channel on which the DP-990
will transmit.
MIDI uses sixteen "MIDI channels," which are numbered 1
through 16.
By connecting MIDI devices and specifying the appropriate
MIDI channel for each device, you can play or select sounds
on those devices.
The DP-990 will receive all sixteen channels (1–16).
1.
Hold down the [Brilliance] button and press
the [3D] button.
The display will indicate "Fnc" and you'll be in Function
mode.
2.
Hold down the Track [Accomp] button and use
the [-] [+] buttons to make the display indicate
"Ch."
When you take your finger off the button, the display
will indicate the value of the setting.
3.
Use the [-] [+] buttons to change the setting.
Settings (Channel)
OFF, 1–16
If you turn this "OFF," the DP-990 will not transmit
MIDI data.
For details on connecting MIDI devices, refer to
"Connecting to MIDI Devices" (p. 84).
76
Sending Recorded Performance Data
to a MIDI Device (Composer MIDI Out)
When Composer MIDI Out is "On," you can send
performance data recorded with the DP-990 to a connected
MIDI device or computer.
1.
Hold down the [Brilliance] button and press
the [3D] button.
The display will indicate "Fnc" and you'll be in Function
mode.
2.
Hold down the Track [Accomp] button and use
the [-] [+] buttons to make the display indicate
"Out."
When you take your finger off the button, the display
will indicate the value of the setting.
3.
Use the [-] [+] buttons to change the setting.
Setting
Performance data is transmitted.
Performance data is not transmitted.
Explanation