Various Settings
In "Function mode" you can make various settings for
performance and recording.
Basic Operation in Function
Mode
1.
Hold down the [Brilliance] button and press
the [3D] button.
The [Brilliance] button and [3D] button will light.
The display will indicate "Fnc" and you'll be in Function
mode.
fig.d-Fnc.eps
2.
Press one of the blinking buttons to select the
setting you want to change.
The display shows the name of the setting while you hold
down the button. The value of the setting will appear
when you release the button.
3.
Use the [-] [+] buttons to change the setting.
4.
If you want to change a different setting, select
the setting you want to change by pressing
one of the buttons that were blinking before
step 2.
5.
Press the [Brilliance] button or the [3D] button
to exit Function mode.
The button indicators will return to their former state.
The settings you change will return to their original
NOTE
state when you turn off the power (except the Ext.
Memory mode settings.) If you want your changes to
be retained even after the power has been turned
off, carry out the Memory Backup procedure (p. 80)
to save the settings.
66
Button
3D Mode
[Reverb]
Transpose Mode
[Transpose]
Octave Shift
[Split]
Damper Pedal Part
Center Pedal Function
[Twin Piano]
(&[-][+])
Left Pedal Function
Master Tuning
[Piano]
Temperament
[E.Piano]
Stretched Tuning
[Organ]
Damper Resonance
[Strings]
String Resonance
[Voice]
Key Off Resonance
[Others]
Metronome Sound
[Metronome]
Countdown
Countdown Sound
[Tempo]
(&[-][+])
Countdown Part
Function
Page
p. 67
p. 68
p. 68
p. 69
p. 69
p. 69
p. 70
p. 70
p. 71
p. 72
p. 72
p. 72
p. 73
p. 73
p. 73
p. 74