Starting Recording; Stopping Recording; Listening To The Recorded Performance - Roland DP-990 Owner's Manual

Starting Recording

5.
Press the [
After two measures of count sound, recording begins.
Recording starts when you start playing the keyboard (without pressing the [
case, a count is not sounded.
When recording begins, the [

Stopping Recording

6.
Press the [
Recording will stop.

Listening to the Recorded Performance

If the "Int Song" indicator is not lit, press the [Int Song/Ext Song] button.
7.
Press the [
You will return to the beginning of the performance you recorded.
8.
Press the [
The recorded performance will play back.
9.
Press the [
NOTE
NOTE
] button or play the keyboard.
] button and [
During the count-in, the count measure is indicated in the display as "-2" then "-1."
] button.
] button.
] button.
If you press the [ ] button while the metronome is sounding, there will be a two-
measure count ("count-in") before playback begins.
] button once again to stop playback.
The recorded performance will disappear when you turn off the power. If you want to
keep the performance you recorded, you must save it in internal memory or USB
memory. Refer to p. 62.
If you have not saved the performance you recorded, you won't be able to play back
another song. You'll have to erase (p. 59) or save (p. 62) the performance before
playing back another song.
] button will light.
Recording
] button). In this
53