Changing The Effect Of The Pedal (Left Pedal); Preventing Doubled Notes When Connected To A Sequencer (Local Control); Midi Transmit Channel Settings (Midi Transmit Ch.); Changing The Language Displayed In The Screen (Language) - Roland HP702 Owner's Manual

Making Various Settings (Function Mode)
Indication Value

Changing the Effect of the Pedal (Left Pedal)

When you turn on the power, the left pedal functions as a soft pedal (p. 7). You can change the function of the pedal to a
variety of other operations. By assigning a function to the pedal, you can instantly change a setting by pressing the pedal while
Left Pedal you perform.
Soft
Play/Stop
Layer
You can assign a pedal to successively switch registrations (p. 8). Each time you press the pedal, you will switch to the next
registration.
* Pedal function settings take priority in the following order: "Reg. Pedal Shift" 0 "Center/Left Pedal. "
Reg. Pedal Off
Shift
Left Pedal
Center Pedal
MIDI-related settings

Preventing Doubled Notes When Connected to a Sequencer (Local Control)

When you have a MIDI sequencer connected via USB, set this parameter to Local Off.
Since most sequencers have their Thru function turned on, notes you play on the keyboard may be sounded in duplicate, or
get dropped. To prevent this, you can enable the "Local Off" setting so that the keyboard and internal sound generator will be
Local Control
disconnected.
Off
On

MIDI Transmit Channel Settings (MIDI Transmit Ch.)

MIDI
This setting specifies the MIDI channel on which the unit will transmit.
Transmit Ch.
This unit will receive all sixteen channels (1–16).
Off, 1–16
Overall operation settings

Changing the Language Displayed in the Screen (Language)

Language
You can change the language that is displayed in the screen.
English, Japanese

Adjusting the Brightness of the Display (Display Contrast)

Display
Contrast
You can adjust the brightness of the piano's display.
1–10

Specifying the Time Until the Operating Panel Is Dimmed (Screen Saver)

Screen Saver
If no operations are performed for a specific length of time, the operating panel's button LEDs and display are dimmed.
You can specify the time until they are dimmed.
Off, 30 sec., 1 min., 5 min., 10 min.

Specifying a Maximum Volume (Volume Limit)

You can specify a maximum volume value. This lets you prevent loud sound from being produced unintentionally.
Volume Limit
MEMO
You can also set the volume limit by holding down the [ ] knob and turning the [ ] knob.
20, 40, 60, 80,100
26
Explanation
The pedal functions as a soft pedal.
The pedal has the same function as the [ s ] button.
Pressing the pedal will layer on Tone 2, used for Dual Play.
* This is available only when using Dual Play.
Pressing the pedal does not change the registration.
The soft pedal can be used only for switching registrations. In this case, the function assigned to the soft pedal
cannot be used.
The sostenuto pedal can be used only for switching registrations. In this case, the function assigned to the
sostenuto pedal cannot be used.
Local Control is off.
The keyboard is disconnected from the internal sound generator. Playing the keyboard will not produce sound.
Local Control is on.
The keyboard is connected to the internal sound generator.