MSA ALTAIR 5X Operating Manual page 29

Setting Sensor Alarms
This page allows modifying the preset alarm values of:
-
LOW Alarm
-
HIGH Alarm
-
STEL Alarm
-
TWA Alarm.
NOTE: Factory-set alarm values are shown in section 5.2
(1) Press the q button to enter Sensor Alarm setup.

LOW Alarm Setup screen displays.
Fig. 7 Sensor Alarm Setup
(2) Press:
the  button to abort the operation or
the  button to go to next alarm setup or
the q button to change the alarm setpoints.

Alarm Value for the first Sensor displays.
Fig. 8 Sensor Alarm Setup
Set values for Sensor Alarm by pressing the  or  button.
(3)
(4) Press the q button to confirm set value.
(5) Repeat setting for all other sensors.
Press the  button to return to the Alarm Options menu.
(6)
(7) Repeat setting for all other alarm types.
ALTAIR 5X MSHA
Operation
US
29