Canon LX-MU500Z User Manual page 9

Pay attention to the following points regarding the power source, power plug and handling of
the connector. Failure to do so may cause a fire or electric shock.
Caution
Installation and Use
Pay attention to the following points regarding installation and handling of the projector. Failure
to do so may cause a fire, electric shock or personal injury.
Prohibition
Warning
• Do not remove the power plug or connector with wet hands.
• Insert the power plug and connector securely up to the base.
• Additionally, do not use a damaged power plug or an outlet that is
loose.
• Do not pull the power cord and be sure to hold the power plug or
connector when removing. Incorrect handling may damage the
power cord.
• Do not exceed the rated capacity of the outlet (as by using it for
more than one piece of equipment), which poses a risk of fire from
overheating.
• Before using an extension cord, check carefully to avoid
exceeding the cord's rated capacity.
• Periodically inspect the power plug and outlet and remove any
dust or dirt from between the plug and the outlet.
• Do not touch the projector itself, the power cord, or the cable if
lightening strikes.
• Do not move the projector until you have switched off the power,
removed the power plug from the power outlet and unplugged any
other cables.
• Unplug the projector before cleaning or maintenance.
• Do not use the projector where it might get wet, such as outdoors
or by bathtubs or showers.
• Do not place containers containing a liquid on top of the projector.
• Do not remove the cabinet from the projector or disassemble it.
The interior of the projector contains high-voltage components as
well as parts that are hot. If inspection, maintenance or repair is
required, contact the Canon Customer Support Center.
• Do not disassemble or modify the projector (including consumable
parts) or the remote control.
9
Safety instructions