Table of Contents
Advertisement
Precautions for Use
As this section contains important safety-related information, be sure to read the following
carefully beforehand in order to use your projector correctly and safely.
Power Supply
During installation, keep the projector plug easily accessible so that the projector can be
unplugged immediately if necessary, or keep a circuit breaker within reach. If the following
situations occur, turn the power off, remove the power plug from the power outlet and contact
the Canon Customer Support Center. Failure to do so could cause a fire or result in an electric
shock.
Pay attention to the following points regarding the power source, power plug and handling of
the connector. Failure to do so may cause a fire or electric shock.
Prohibition
8
Safety instructions
Warning
• If smoke is emitted
• If an unusual smell or noise is emitted
• If water or other liquid has entered the projector
• If metal or any other foreign material has entered the projector
• If the projector is knocked over or dropped and the cabinet is
damaged
• Do not place any objects on the power cord and do not allow it to
become trapped under the projector.
• Do not cover the power cord with a carpet.
• Do not modify or excessively bend, twist, pull, wind, or bundle the
power cord.
• Keep the power cord away from heaters and other sources of
heat.
• Do not use a damaged power cord. If the power cord is damaged,
purchase a replacement from your dealer.
• Do not use any power source with a voltage other than the voltage
indicated (AC 100–240 V).
• Do not insert any metal objects into the contact parts of the power
plug or connector.
• The power cord included with this projector is for use exclusively
with this product. Do not use this cord for other products.
Advertisement
Table of Contents
