Table of Contents
Advertisement
Connecting multiple sources through HDBaseT
HDBaseT is a connectivity standard that combines HD digital video, audio, Ethernet, and
various control signals. These signals are transmitted with one CAT5e (or above) cable up to
100 meters in length. With the use of HDBaseT switching matrix (commercially available), you
may connect multiple sources to your projector with HDBaseT connection.
When connecting the RJ45 cable, avoid coiling and intertwining the cable as it may cause signal
noise or interruption.
The illustration below is for reference only, actual layout may vary.
VGA IN
YPbPr
Projector
• Use a shielded LAN cable rated at CAT5e or better.
• Maximum transmission distance is 100 m.
• However, maximum transmission distance may be shorter in some environments.
• Do not use the LAN cable when it is coiled or bundled.
• Inserting or removing the LAN cable during projection may cause noise.
• Connectivity with all HDBaseT transmitters on the market is not guaranteed.
• Some HDBaseT transmitters may not enable correct projection when used to connect source
equipment to the projector.
RJ45
HDMI
RS232
Lan
HDBaseT matrix
IR TX
RJ45
HD Connect
IR RX
LAN cable
Notebook computer
Blu-ray player
Control computer
Connection
33
Advertisement
Table of Contents
