Crevice Tool; Warnings Regarding The Energy Label; Hard Floor Brush - Beko VCO 62602 AB User Manual

3 Usage

Crevice tool

1. If the accessory is on, press the button found on
the body and push it slightly to close.
– It clicks.
2. Attach the end of the handle or the telescopic
tube (11) to the inner side of the upholstery
tool.
– You can now start vacuum cleaning.
A
WARNING: The crevice tool must
be adjusted to remain outside.
3. Pull the accessory to remove it when the
process is complete.
A
WARNING: Do not make cleaning
by using the handle' s (13) end part.

3.9 Hard floor brush

The hard floor brush (14) was developed for
use on hard floors such as tile, ceramic, parquet,
wooden floors etc.
It prevents potential scratches while cleaning
hard floors thanks to its specially-developed soft
hair.
Vacuum Cleaner / User manual
3.10 Warnings regarding the
energy label
This is a general-purpose vacuum cleaner. In
order to reach the highest energy efficiency
and cleaning performance class specified in
carpet and parquet cleaning, please use the
high-performance parquet/carpet brush (9).
The specified values regarding the energy label
were determined according to the predefined
measurement methods (in line with EN60312-1).
3.11 Switching off the vacuum
cleaner and parking feature
1. Switch off the appliance with the on/off button
(1) and unplug it.
2. Insert the parking hook (7) of the parquet/
carpet brush into the parking groove located at
the rear section of the appliance.
9 / EN