Adjusting The Suction; Upholstery Tool; Crevice Tool - Beko VCC34818WD User Manual

3 Usage

3.6.1 Adjusting the suction

power
1. You can adjust the suction power using the
suction power adjustment knob (13) found
on the appliance. Rotating in the clockwise
direction will increase the suction power and
in counterclockwise direction will decrease the
suction power.
2. You can lower the suction power of the parquet
carpet brush by pulling backward the vacuum
adjustment control (2) located on the handle
(1) without the need to use the suction power
adjustment knob (13) found on the appliance.
3.6.2 Dust indicator
Dust indicator (11) indicates the fullness of the
dust bag. When the indicator displays red zone
more than 50%, replace the dust bag. (see 4.1).
3.7 Accessories

Upholstery tool

Suitable for cleaning the floorings,
stair steps, inside of the cars, sofas,
armchairs etc.
Dust brush
Suitable for cleaning the curtains,
and sensitive and fragile objects.

Crevice tool

Suitable for the cleaning of the
surfaces which are difficult to
clean, such as the areas remaining
under the sofas and furniture.
Vacuum Cleaner / User Manual
A
WARNING: Do not perform
cleaning tasks using the end part of
the handle (1).
3.8 Switching off and parking
the appliance
1. Switch off the appliance with the on/off button
(15) and unplug it.
2. Wind the power cable by pressing the power
cable winding button (12).
Vertical parking feature
Insert the parking hook of the parquet/carpet
brush (7) into the parking groove located at the
bottom section of the appliance.
Horizontal parking feature
Insert the parking hook of the parquet/carpet
brush (7) into the parking groove located at the
rear section of the appliance.
9 / EN