Adjusting The Parquet/ Carpet Brush; Operation; Upholstery Tool; Crevice Tool - Beko VCO32803AF User Manual

3 Usage
3.5 Adjusting the parquet/
carpet brush
Press the adjustment latch (10) located on the
parquet/carpet brush (11) and;
• Vacuum on firm ground and parquet; extend the
brush before vacuuming.
• Vacuum on carpets and rugs; retract the brush
before vacuuming.

3.6 Operation

1. Plug in the appliance after pulling the power
plug located at the back of the appliance.
WARNING: Stop pulling the
appliance cable when it comes to
A
the yellow mark located on it. After
the yellow mark, the red mark will
come. Do not pull any more after
reaching the red mark.
2. Use the suction power adjustment knob (3)
found on the appliance to set it to the desired
suction power (see 3.6).
3. Press the on/off button (1) to switch on your
appliance.
Vacuum Cleaner / User Manual
3.7 Accessories
Accessories have been designed in one piece to
save space and provide practical use.

Upholstery tool

Suitable for cleaning the floorings,
stair steps, inside of the cars, sofas,
armchairs etc.
Dust brush
Suitable for cleaning the curtains,
and sensitive and fragile objects.

Crevice tool

Suitable for the cleaning of the
surfaces which are difficult to
clean, such as the areas remaining
under the sofas and furniture.
A
WARNING: The crevice tool must
be adjusted to remain outside.
• Pull the accessory to remove it when the process
is complete.
A
WARNING: Do not make cleaning
by using the handle' s (15) end part.
9 / EN