Parameters Not Used For Sccp; Creating A Cisco Ata Default Configuration File - Cisco ATA 188 Administrator's Manual

Configuring the Cisco ATA Using a TFTP Server

Parameters Not Used for SCCP

The following parameters appear on the Cisco ATA Web configuration screen but are used only for the
MGCP image and not for SCCP:
•
•
•
•
•
•
•
•
•
•
•

Creating a Cisco ATA Default Configuration File

The Cisco ATA release-software zip files includes a file called atadefault.cfg, which is a binary file that
contains all the default parameters for the Cisco ATA. However, you likely will need to create your own
atadefault.cfg file to contain the default settings that you want Cisco ATAs in your environment to use.
For information on each configuration parameter, including all default values, see
"Parameters and Defaults."
Use the text file called sk_example.txt as a basis for creating your default file. The sk_example.txt file
is included in the software-release zip file and contains all default values. This file is shown without its
annotations in the
The following procedure illustrates how to create the Cisco ATA default configuration file, convert it to
the required binary format that the Cisco ATA can read, and store it on the TFTP server so that the
Cisco ATA will download it during the boot-up process:
Procedure
Make a copy of the sk_example.txt file and rename it atadefault.txt.
Step 1
Make the desired configuration changes by editing the atadefault.txt file, then save the file.
Step 2
Convert the atadefault.txt file to a binary file by running the cfgfmt.exe tool, which is bundled with the
Step 3
Cisco ATA software.
Note
If you wish to encrypt the binary file for security reasons, see the
cfgfmt Tool" section on page
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SCCP)
3-10
CA0UID
CA1UID
CfgInterval
CodecName
MGCPPort
MGCPVer
NumTxFrames
PrefCodec
RetxIntvl
TetxLim
ToConfig
"Configuration Text File Template" section on page
Be sure to name the output file atadefault.cfg.
3-14.
Chapter 3 Configuring the Cisco ATA for SCCP
Chapter 5,
5-2.
"Using the EncryptKey Parameter and
OL-3141-01