Installation And Configuration Overview - Cisco ATA 188 Administrator's Manual

Chapter 1 Cisco Analog Telephone Adaptor Overview

Installation and Configuration Overview

Table 1-3
in a typical Cisco CallManager environment.
Table 1-3 Overview of the Steps Required to Install and Configure the Cisco ATA and Make it Operational
Action
1. Plan the network and Cisco ATA configuration.
Install the Ethernet connection.
2.
Install and configure the other network devices.
3.
Install the Cisco ATA but do not power up the Cisco ATA
4.
yet.
If you power up the Cisco ATA before adding the
Note
Cisco ATA to the Cisco CallManager, you will need to
perform a reset once you have added the Cisco ATA to
the Cisco CallManager.
Download the desired Cisco ATA release software zip file
5.
from the Cisco web site, then configure the Cisco ATA.
Add the Cisco ATA to the Cisco CallManager.
6.
Power up the Cisco ATA.
7.
Periodically, you can upgrade an individual Cisco ATA or
8.
all Cisco ATAs to a new signaling image by using the
Cisco CallManager administration web pages.
OL-3141-01
provides the basic steps required to install and configure the Cisco ATA to make it operational
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SCCP)
Installation and Configuration Overview
Reference
What the Cisco ATA Package Includes, page 2-2
Resetting the Cisco ATA Using Cisco CallManager, page
3-23
Chapter 3, "Configuring the Cisco ATA for SCCP"
Chapter 4, "Adding the Cisco ATA to the
Cisco CallManager"
Chapter 7, "Upgrading the Cisco ATA Signaling Image"
1-9