Network Requirements; Safety Recommendations; What The Cisco Ata Package Includes - Cisco ATA 188 Administrator's Manual

Network Requirements

Network Requirements
The Cisco ATA acts as an endpoint on an IP telephony network. The following equipment is required:
•
•
•

Safety Recommendations

To ensure general safety, follow these guidelines:
•
•
•
•
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Read the installation instructions before you connect the system to its power source.
Warning
The plug-socket combination must be accessible at all times because it serves as the main
Warning
disconnecting device.
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
For translated warnings, see the Regulatory Compliance and Safety Information for the Cisco ATA 186
and Cisco ATA 188 manual.

What the Cisco ATA Package Includes

The Cisco ATA package contains the following items:
•
•
•
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SCCP)
2-2
Cisco CallManager version 3.0 or later
Voice packet gateway—Required if you are connecting to the Public Switched Telephone Network
(PSTN)
Ethernet connection
Do not get this product wet or pour liquids into this device.
Do not open or disassemble this product.
Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
Use only the power cube that comes with the Cisco ATA.
Cisco ATA 186 or Cisco ATA 188 Analog Telephone Adaptor
Read Me First - ATA Boot Load Information
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor at a Glance
Chapter 2 Installing the Cisco ATA
OL-3141-01