Ca0Orcm0 And Ca1Orcm1 - Cisco ATA 188 Administrator's Manual

Chapter 5 Parameters and Defaults
Range
Maximum 51 characters for each parameter
Voice Configuration Menu Access Codes
46 and 47 for EPID0orSID0 and EPID1orSID1, respectively

CA0orCM0 and CA1orCM1

Description
CMx specifies the IP address (with an optional port number) or the URL of the primary or secondary
Cisco CallManager to which the Cisco ATA should register. Use the CM0 parameter for the primary
Cisco CallManager and the CM1 parameter for the secondary Cisco CallManager parameter. (CAx is not for
SCCP.)
Note Use this parameter only if the default Cisco CallManager TFTP method is not desirable for configuring
the Cisco CallManager IP address, in which case you must set the UseTftp parameter to 0.
If you specify a Cisco CallManager port, you must separate the port number from the host IP address
with a colon (:).
Examples
Examples of CA0orCM0 values follow:
•
•
Value Type
Alphanumeric string
Range
Maximum 31 characters
Default
0
Voice Configuration Menu Access Code
5 and 6, respectively
Related Parameters
•
•
Ol-3141-01
192.168.1.2:2727
ca.cisco.com.
UseTFTP, page 5-4
Domain, page 5-16
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SCCP)
Account Information Parameters
5-9