Table Of Contents - Automatic Systems BL40 Technical Manual

1. SAFETY WARNINGS
2. DESCRIPTION
2.1. Location of the components
2.2. Operating principle
2.3. Mechanical locking of the arm
3. AS1320 CONTROL BOARD
3.1. PRDSTD - BL_xxx menu: Troubleshooting and monitoring
3.2. QUICK START menu: Quick configuration
4. INSTALLATION
4.1. Storing the equipment before installation
4.2. Positioning the equipment
4.3. Assembly of the round arm for BL40
4.4. Assembly of the central round arm for BL41
4.5. Assembly of the oval arm for BL43 & BL44
4.6. Assembly of the arm with folding fence for BL46
4.7. Electrical connections
5. ADJUSTMENTS
5.1. Setting the parameters for the variable speed controller
5.2. Adjusting the balancing springs
5.3. Adjusting the position sensors
6. USE
6.1. First startup
6.2. Daily startup
6.3. Turning off the power
6.4. Manual opening of the arm
6.5. Maintenance
6.6. Troubleshooting
7. TECHNICAL SPECIFICATIONS
8. DIMENSIONS
9. WIRING DIAGRAMS
9.1. Control blocks assignment
The information in this document is the property of Automatic Systems and is confidential. The consignee withholds from using it for anything other than the use of the products or the execution of the
project to which they belong and withholds from communicating it to third parties without prior written agreement from Automatic Systems. Document subject to change without prior notice.

TABLE OF CONTENTS

Technical Manual NAM-BL4x-MT-EN-C
p 3/58
4
6
6
7
8
10
12
19
27
27
27
28
30
32
34
40
41
41
42
45
46
46
46
46
47
48
49
51
52
54
55