Copyright Notice - MakerBot Replicator+ Quick Start Manual

*Safety Warning*
During the course of normal operation of the Replicator+ a couple potentials for injury will
arise. The extruder (or print nozzle) will reach temperatures of around 230 C (446 F). The
extruder and other metal parts nearby will cause burns if care is not taken. The Replicator+
also has several "pinch points". While the Replicator+ is printing the user should never place
their hands or other body parts inside the machine. Long hair or dangling attire over the
printer may also become snagged in the printer's moving parts. Please be sure to work
cautiously and ask staff for assistance if you are unsure on operating procedures. At any time
the printer can be paused by using the MakerBot Print software or the Replicator+'s onboard
controls. When in doubt, ask.

Copyright Notice

The copyright law of the United States (Title 17, U.S. Code) governs the making of copies or
other reproductions of copyrighted material. The person using GCLS equipment is liable for
any infringement.