Configuring Static Routing For The Internal Management Port - Fortinet FortiSwitch-28C Administration Manual

Figure 4: Out of band management on a FortiSwitch-1024D
Syntax
config system interface
edit mgmt
next
edit internal
end
end

Configuring Static Routing for the Internal Management Port

Using the CLI:
config router static
edit 1
end
end
System Settings
Port 1 used as an
Ethernet data port
set ip 10.105.142.19 255.255.255.0
set allowaccess ping https http ssh snmp telnet
set type physical
set type physical
set device <internal>
set default gateway
set gateway 192.168.0.10
Page 10
Dedicated
MGMT port
Managing a FortiSwitch unit with a FortiGate