Power Over Ethernet; Enabling Poe On A Port; Determining The Poe Power Capacity; Reset The Poe Power On A Port - Fortinet FortiSwitch-28C Administration Manual

Power over Ethernet

This chapter contains information on using Power over Ethernet (PoE) with your FortiSwitch.
Power over Ethernet is only available on the following models: FortiSwitch-108D-POE,
FortiSwitch-124D-POE, FortiSwitch-224D-POE, and FortiSwitch-324B-POE.

Enabling PoE on a Port

config switch physical-port
edit <port>
end
end

Determining the PoE Power Capacity

To determine the PoE power capacity, use the following command:
get switch poe inline

Reset the PoE Power on a Port

To reset the PoE power on a port, use the following command:
execute poe-reset <port>
set poe-status enable
Page 20