Route Static - Fortinet 5003A Fabric And Base Backplane Communications Manual

FortiSwitch-5003A CLI reference

route static

Use this command to add, edit, or delete static routes for the mgmt interface.
Syntax
config route static
edit <sequence_number>
set device <interface_name>
set dst <destination-address_ipv4mask>
set gateway <gateway-address_ipv4>
end
Variables
edit <sequence_number>
device <interface_name>
dst <destination-
address_ipv4mask>
gateway <gateway-
address_ipv4>
Example
This example shows how to add a default route for the mgmt interface that points to 192.168.22.44.
config route static
edit 2
set device mgmt
set dst 0.0.0.0 0.0.0.0
set gateway 192.168.22.44
end
Related topics
• config system interface
• execute traceroute
FortiSwitch-5003A and 5003 Fabric and Base Backplane Communications Guide
01-30000-85717-20081205
Description
Enter a sequence number to identify the static route.
The device name is always mgmt because you cannot
configure routing for other FortiSwitch-5003A interfaces.
Enter the destination IP address and network mask for this
route.
You can enter 0.0.0.0 0.0.0.0 to create a default route.
Enter the IP address of the next-hop router to which traffic is
forwarded by this route.
config
Default
No default.
mgmt
0.0.0.0
0.0.0.0
0.0.0.0
93