Ports; Configuring A Port Mirror - Fortinet FortiSwitch-28C Administration Manual

Ports

This chapter contains information on configuring your FortiSwitch's ports.

Configuring a Port Mirror

Using the web-based manager:
1. Go to Switch > Port > Mirror.
2. Enable Status.
3. Select a Destination Port.
4. Select available ports to be used for Ingress Monitoring and Egress Monitoring.
Using the CLI:
config switch mirror
set dst "port5"
set src-egress "port2" "port3"
set src-ingress "port2" "port4"
set status active
end
Page 11